Tag: stainless works

Meezer Group Featured on Stainless Works Website

Stainless Works featured Meezer Group on their website. See the article at http://www.stainlessworks.net/dealers/featured-dealer.html

Tagged with: ,

Koshak’s 2008 Corvette C6 Dyno Tuning After Stainless Works Exhaust

Stainless Works Ceramic Coated Headers Stainless Works X-Pipe and Axle-Back SLP Crank Pulley Previously posted images can be found at Installation of Stainless Works Headers, X-Pipe and Axle-Back in a 2006 Chevrolet Corvette C6

Tagged with: , ,

Installation of Stainless Works Headers, X-Pipe and Axle-Back in a 2006 Chevrolet Corvette C6

تركيب هيدرز و كات باك ستينلس وركس في كورفت C6     We just finished installing Stainless Works exhaust in my friend’s 2006 Chevrolet Corvette C6. The system includes: Stainless Works 1-7/8″ headers with 3″ off-road x-pipe. Part Number ZO6178OR Optional

Tagged with: , , , , , , ,

Meezer Dodge Charger Pursuit Runs 13.0 sec @ 107 mph at Yas Marina NHRA Dragstrip

تجارب تشارجر ميزر في حلبة ياس مارينا للربع ميل Here is our first 1/4 mile run for the Charger. The track was Yas Marina NHRA Dragstrip at Abu Dhabi, UAE. Car Details 2010 Dodge Charger Pursuit 5.7L Modifications Stainless Works

Tagged with: , , , , , , , , , , , , ,

Meezer 2006 Mustang GT, 314 whp and 0 to 60 in 4.4 seconds

Here is our first acceleration test for the 2006 Mustang GT 2006 Mustang GT 3.55 stock gears manual transmission stock power 249whp & 279 ft-lb mods Steeda Cold Air Intake Steeda Pulleys Ford Racing Intake Manifold BBK Throttle Body Stainless

Tagged with: , , , , , , , ,

Our Charger Ran 4.6 Seconds in the 0 – 60 mph Acceleration Test

Here is Meezer‘s Police Package 2010 Dodge Charger 5.7 Hemi after some tweaking to the tune. Mods: DiabloSport Trinity with Custom Tune S&B Cold Air Intake Stainless Works Long Tube Off-Road Headers Jet 180F Thermostat Article about the current mods

Tagged with: , , , , , , , , , ,

Dyno Day – Before and After Stainless Works Off-Road Long Tube Headers, X-pipe and Catback in a 2006 Crown Victoria

Another dyno day to test Stainless Works headers and exhaust system. This time in a 2006 Ford Crown Victoria. We ran the car first with the following mods: SCT Custom Tune Marauder Airbox and MAF Steeda Pulleys Denso Iridium Spark

Tagged with: , , , , , , ,

Dyno Day – Testing the 2010 Charger before and after Stainless Works Off-Road Long Tube Headers

  Here is our 2010 Dodge Charger Police Package 5.7L before and after Stainless Works Off-Road Long Tube Headers. We ran the car with the following mods: S&B Cold Air Intake DiabloSport Trinity with 93 Octane and CAI Tune Results

Tagged with: , , , ,
Top